Partial Match Anchor Text: 6 Patterns I Use (With Examples)

Partial Match Anchor Text: 6 Patterns I Use

Partial match anchor text is link text that contains part of your target keyword, or the keyword mixed with other words, without being the exact phrase on its own. If the page targets “payroll software”, then “payroll software for small teams”, “simple payroll tools” and “how we run payroll” are all partial match anchors. It is the anchor type I lean on most for inner pages, because it tells Google what the page is about without screaming it. This post shows the six patterns I use, how much of a profile they should cover, and where people get them wrong.

Quick context on me: I have been doing link building since 2019, mostly guest posts, link insertions and digital PR for small SaaS and ecommerce sites. Anchor text is the one line in every brief I write by hand. Publishers get a page and a suggested anchor, and most of the time that suggestion is a partial match.

Partial Match Anchor Text Examples

Definitions only go so far, so here is how I tag anchors when the target keyword is “link building packages”. The same logic works for any keyword.

AnchorTypeMy note
link building packagesExact matchThe keyword and nothing else
monthly link building packagesPartial matchKeyword plus a modifier
packages for link buildingPartial matchSame words, new order
how link building packages are pricedPartial matchKeyword inside a phrase
buying links in bundlesPartial match (semantic)Close meaning, different words
Hamza’s link building packagesBrand + keywordI count these as partial
hamzaalisiddiqui.comNaked URLNo keyword at all
this breakdownGenericNo keyword, no brand

The naked URL row in that table is the opposite end of the scale from partial match: almost no keyword signal, very little risk. If you want to know when I use those, read my post on naked URL anchor text.

Some tools only count an anchor as partial match if it holds at least one word from the keyword. I also count close synonyms (“buying links in bundles”) because Google reads meaning, not just strings. Pick one rule and stick to it, otherwise your ratios will jump around every time you re-check.

Why Partial Match Anchor Text Beats Exact Match for Most Pages

Google has been clear for years that links built to manipulate rankings break its rules. Its spam policies list links with optimized anchor text as an example of link schemes. Exact match anchors are the most obvious version of that. One or two look normal. Twenty on the same page look paid.

Partial match anchor text sits in the safe middle. It still carries keyword relevance, which branded and generic anchors do not. And they read like something a real writer would type, because real writers almost never repeat your exact keyword word for word. When someone cites a pricing guide on their own blog, they write “this guide to link building costs”, not “link building cost”.

There is also a ranking upside people forget. A page that gets anchors like “monthly link building packages”, “cheap packages for links” and “how agencies price link building” is being told about a whole cluster of searches, not just one. Long-tail queries that only appear in anchors can still send a page impressions. If you want the other side of this, I wrote a full post on exact match anchor text and when I still use it.

6 Partial Match Anchor Patterns I Use

These are the partial match anchor text patterns I put into briefs. I rotate them so no two links to the same page look like they came from the same template.

1. Keyword plus a modifier

Add a word before or after: “affordable link building packages”, “link building packages for SaaS”, “2026 link building packages”. This is the closest pattern to exact match, so I use it sparingly. It works well when the modifier is a real search term the page also covers.

2. Keyword inside a question or phrase

“How much link building packages cost”, “what goes into a link building package”. These feel the most natural in body copy because they match how people talk. They are my default for guest posts.

3. Reordered or split keyword

“Packages for link building”, “link packages built for small sites”. Same words, broken up. Short and clean, which helps when a publisher wants a tight anchor.

4. Semantic or synonym anchor

“Bundled backlink plans”, “monthly outreach retainers”. No exact keyword word needs to appear. These spread relevance to related terms and are very hard to over-optimize. I give these to editors who hate keyword-heavy anchors.

5. Brand plus keyword

“Acme’s payroll software”, “the payroll tool from Acme”. This is the safest way to carry a keyword because the brand name makes it read like a citation. I covered the pure brand side in my post on branded anchor text, and this hybrid is the bridge between the two.

6. Long descriptive anchor

Sometimes the whole clause is the link: “a breakdown of what each link building package includes and costs”. Google’s own guidance on writing good anchor text asks for text that is descriptive and reasonably concise, so I keep these under about ten words. They are great on resource pages and in link insertions where the sentence already exists.

How Much Partial Match Anchor Text Is Safe?

There is no official number. Google has never published one, and anyone who quotes an exact “safe” percentage is guessing. What I use are working ranges based on what normal, unmanipulated sites in a niche look like. Before I set targets, I pull the anchors of the top 5 pages for the keyword and compare.

Page typePartial matchExact matchBranded + URLGeneric / other
Homepage10 to 20 pctUnder 5 pct50 to 70 pctRest
Service or product page25 to 40 pctUnder 10 pct20 to 35 pctRest
Blog post or guide30 to 50 pctUnder 10 pct15 to 30 pctRest
Tool or calculator20 to 35 pctUnder 10 pct25 to 40 pctRest

Treat these as starting points, not rules. In a niche where every competitor has loud anchors, you can sit higher. In a niche full of natural editorial links, sit lower. The quickest way to see where you stand is to paste your anchor export into my free anchor text ratio checker, which splits the list into these groups for you.

A Worked Example (Hypothetical Numbers)

Say you run a guide page targeting “invoice templates” and it has 40 links from different sites. You export the anchors and get this split:

  • Exact match “invoice templates”: 9 links (about 22 pct)
  • Partial match: 8 links (20 pct)
  • Branded and naked URL: 15 links (about 38 pct)
  • Generic and image links: 8 links (20 pct)

Exact match is more than double where I would want it on a guide. You cannot easily change old anchors, so the fix is dilution. If the next 20 links you build are 12 partial match, 6 branded and 2 generic, with zero exact match, the page ends up at 60 links with exact match at 9 (15 pct) and partial match at 20 (about 33 pct). Still a bit heavy on exact, but heading the right way, and the next batch can finish the job.

For those 12 links of partial match anchor text I would brief a mix like “free invoice templates for freelancers”, “a template for your first invoice”, “printable invoice formats” and “how to fill in an invoice template”. Four patterns, no repeats. If you are working on a page that already looks over the line, my guide to anchor text over-optimization walks through the full cleanup.

How I Get Publishers to Use My Anchor

Choosing the anchor is half the work. Getting it live as written is the other half. A few things that help me:

  1. Write the sentence, not just the anchor. For link insertions I send a full sentence that fits the paragraph. Editors accept that far more often than a bare phrase.
  2. Offer two options. One partial match and one branded. The editor feels in control and often picks the partial one.
  3. Match the host page’s tone. A casual blog gets “the templates I use”, a trade site gets “invoice template formats for B2B billing”.
  4. Never push exact match on a strict editor. It is the fastest way to lose the placement.
  5. Log the live anchor. Publishers change anchors more often than you think. I record what actually went live, not what I asked for.

Common Mistakes With Partial Match Anchors

  • One modifier on repeat. “Best invoice templates” twelve times is not partial match variety. Google sees a pattern, and so does any reviewer.
  • Anchors stuffed with two keywords. “Cheap invoice templates and free receipt maker” reads like spam and waters down both terms.
  • Ignoring the sentence around the link. Moz’s anchor text guide makes the point that the surrounding text matters too. A great anchor in an off-topic paragraph does little.
  • Counting only the anchor you briefed. If you never check what went live, your ratio sheet is fiction.
  • Using partial anchors on a page that cannot rank. Anchors tune relevance. They do not fix a thin page. Fix the content first.
  • Forgetting internal links. Your own internal anchors can be more descriptive and help the page too, as I explain in my internal linking strategy post.

My Partial Match Anchor Text Checklist

I run through this before any brief goes out:

  • Export the current anchors for the target page, not the whole domain.
  • Tag each one: exact, partial, branded, URL, generic.
  • Compare with the top 5 ranking pages for the keyword.
  • Set a target split for the next 10 to 20 links.
  • Write at least four different partial patterns for the batch.
  • Add one branded option per link as a fallback.
  • Write the full sentence for each insertion.
  • Record the live anchor and URL once the link is up.
  • Re-check the split every month.

FAQ

What is partial match anchor text?

It is link text that includes part of your target keyword or a close variation, mixed with other words. “Payroll software for startups” is a partial match anchor for a page targeting “payroll software”.

Is partial match anchor text safe?

Yes, when it is varied. The risk comes from repeating the same anchor across many links, not from the anchor type itself. Rotate patterns and keep plenty of branded and generic links in the mix.

What is the difference between exact match and partial match anchors?

An exact match anchor is the keyword and nothing else. A partial match anchor adds words, reorders the keyword or uses a variation. Partial match carries most of the relevance with much less risk of looking manipulated.

What percentage of anchors should be partial match?

Google gives no number. As a working range I aim for roughly 25 to 50 pct on inner pages and 10 to 20 pct on homepages, then adjust after comparing with the pages that already rank.

Do synonyms count as partial match anchor text?

Tools differ. Some only count anchors that contain a keyword word. I count close synonyms too, because Google understands meaning. Just use the same rule every time you measure.

Wrapping Up

Partial match anchor text is where relevance and safety meet. Pull your anchors, see which pattern you are leaning on too hard, and plan the next batch with at least four different shapes. If you would rather hand the anchor planning and outreach to someone who does it every day, take a look at my link building services. Every brief I send has the anchor and the sentence written before a pitch goes out.