Naked URL Anchor Text: When I Use It and How Much

Naked URL Anchor Text: When I Use It and How Much

Naked URL anchor text is a link where the clickable words are the web address itself, like hamzaalisiddiqui.com or https://example.com/pricing/, instead of a keyword or a phrase. It is one of the safest anchor types you can have, because people use it all the time without thinking about SEO. It carries almost no keyword signal, though, so a profile made only of naked URLs leaves relevance on the table. Below I explain how I use them, how many I aim for, and the few cases where they quietly hurt you.

I have been building links since 2019, mostly guest posts, link insertions and digital PR for small SaaS and ecommerce brands. Every anchor plan I write has a column for naked URLs. Clients often ask why I “waste” links on them. This post is my answer.

What Naked URL Anchor Text Looks Like

A naked URL is not one thing. There are a few versions, and I tag them separately in audits because they behave a little differently on the page.

VersionExample anchorWhere you usually see it
Bare domainexample.comDirectories, citations, forum signatures
www domainwww.example.comOlder sites, press pages, PDFs
Full protocol URLhttps://example.comAuto-linked text in comments and docs
Deep URLexample.com/blog/guide/Resource lists, footnotes, Reddit posts
URL with trackingexample.com/?ref=partnerPartner pages, newsletters

All five count as naked URL anchor text in tools like Ahrefs and Semrush. I keep them in one bucket for ratios, but I look at deep URLs on their own, since a long ugly address in the middle of a sentence reads badly and publishers are more likely to rewrite it later.

Why Naked URL Anchor Text Still Matters

Google says anchor text should be descriptive and tell users and Google something about the page you link to. You can read that in its own link best practices guide. A naked URL does not do much of that. So why bother?

Three reasons, from my side of the work:

  • It looks natural. Real people paste addresses. A profile with zero naked URLs looks built, not earned.
  • It dilutes risk. If you already have a handful of exact match links, naked URLs and branded links are what keep the keyword share from creeping up.
  • The text around it still counts. Google reads the words near a link too. A naked URL inside a sentence about payroll software still sits in a payroll context.

That last point is the one people miss. I care about the sentence more than the anchor. A naked URL in a paragraph that explains what the page does beats a keyword anchor dropped into an unrelated list.

How Much Naked URL Anchor Text Is Normal?

Google publishes no ratio, and I would not trust anyone who claims there is a magic number. What I do is compare against the pages that already rank for the same query, then use rough working ranges as a starting point. These are my own planning ranges, not a rule.

Page typeNaked URL share I plan forWhy
HomepageAbout 15 to 30 pctHomepages get cited by address all the time
Service or product pageAbout 5 to 15 pctThese need more descriptive anchors
Blog post or guideAbout 5 to 15 pctDeep URLs show up in resource lists
Tool or calculator pageAbout 10 to 20 pctPeople share tools by pasting the link

If you want to check your own split quickly, paste your anchors into my free anchor text ratio checker. It sorts naked URLs, branded, generic, partial and exact match into buckets and shows the share of each, so you can see if one type is out of line before you plan the next batch.

A Worked Example (Hypothetical Numbers)

Say a small accounting SaaS has 60 referring domains to its homepage. You export the anchors and find this: 18 branded, 4 naked URL, 22 exact match on “invoicing software”, 10 partial match and 6 generic. The exact match share is about 37 pct, which is far higher than what I would want on a homepage.

You cannot delete old links easily, so the fix is in the next links you build. If the next 20 links are mostly naked URL and branded, say 8 naked URL, 8 branded and 4 partial, the profile becomes 80 domains with 22 exact match. That is about 28 pct. Still high, but moving the right way, and you did it without touching a single existing link. Another round like that and it starts to look like a normal homepage.

The point of the example is the method, not the numbers. Count first, decide the gap, then use naked URLs as the cheap, low-risk filler that pulls the ratio back.

How I Place Naked URL Anchor Text, Step by Step

1. Decide the page before the anchor

I pick the target page first, check its current anchor split, and only then decide whether this link should be naked, branded or descriptive. Homepages get more naked URLs. Money pages get fewer.

2. Use the short version

example.com reads better than https://www.example.com/. For deep pages I keep it as short as the URL allows. If the slug is long and messy, I use a branded anchor instead, because a 90-character address in a sentence looks odd and editors cut it.

3. Write a sentence that explains the page

This is where the relevance comes from. “You can compare plan prices on example.com/pricing/ before you book a demo” tells the reader and Google what is on the other side. “Visit example.com” tells nobody anything.

4. Match the publisher’s style

Some sites always cite sources by address, often news sites and academic blogs. Others never do. If a publisher writes “according to Moz” and links the brand name, I do not force a naked URL into their post. It sticks out, and the editor will change it anyway.

5. Log it and recount every month

Every link goes into a sheet with the anchor type. Once a month I recount. That keeps the plan honest, because publishers change anchors more often than people think.

Naked URL vs Branded vs Generic Anchors

These three are the “safe” anchor types, and they get mixed up a lot. Here is how I tell them apart when I audit a profile.

Generic anchors like “click here” and “read more” behave a lot like naked URLs in a backlink profile, safe but light on meaning. I break down where they help and where they waste a link in my guide to generic anchor text.

TypeExampleKeyword signalBest use
Naked URLexample.comVery lowHomepages, citations, tool pages
BrandedExampleLow (brand only)Homepage, about page, PR mentions
Genericthis guide, click hereNoneSmall share anywhere, mostly for variety
Brand + keywordExample invoicing toolMediumProduct and service pages

I wrote longer guides on two of these: branded anchor text and partial match anchor text. If you are trying to balance a profile, read those next, because naked URLs only make sense next to the other types.

Common Mistakes With Naked URL Anchor Text

  • Using naked URLs for everything. It is safe, but your inner pages will struggle to rank for anything specific if the anchors and sentences never describe them.
  • Linking the wrong version. If your site lives on https://www and you build links to http without www, every link goes through a redirect. Use the final URL.
  • Long tracking URLs. UTM tags and ref codes in a visible anchor look spammy and can create duplicate URLs. Strip them unless the partner needs them.
  • Ignoring the sentence. A naked URL in a footer list of 40 links is close to worthless. Context matters more than anchor type.
  • Counting naked URLs as a fix for bad links. More safe anchors dilute an aggressive profile. They do not cancel links from spammy sites. That is a different job, covered in my post on anchor text over optimization.

Quick Checklist Before You Request a Naked URL

  • Is this page low on naked URLs compared with the pages that rank?
  • Is the URL short enough to read in a sentence?
  • Is it the final, canonical version (https, correct www, trailing slash)?
  • Does the sentence around it say what the page is about?
  • Does the publisher already cite sources this way?
  • Did I log the anchor type in my tracking sheet?

If you can tick all six, the link is fine. If two or more are a no, I switch to a branded or partial match anchor.

What the Research Says About Anchor Mix

Most studies agree on the broad picture. Moz describes naked URLs as one of the standard anchor types in its anchor text guide and warns against heavy exact match use. Ahrefs makes a similar point in its anchor text post: look at what the ranking pages have and stay close to that, instead of chasing a fixed percentage. That matches what I see in audits. Pages that rank well tend to have a messy, mixed set of anchors, and naked URLs are always somewhere in the mix.

FAQ

What is naked URL anchor text?

It is a link where the visible clickable text is the web address itself, such as example.com or https://example.com/page/, instead of a keyword, brand name or phrase.

Are naked URL backlinks good for SEO?

Yes, as part of a mix. They look natural and lower the risk of over-optimization. They pass little keyword relevance on their own, so the sentence around the link does most of that work.

How many naked URL anchors should I have?

There is no official number. As a working range I plan for about 15 to 30 pct on homepages and 5 to 15 pct on inner pages, then adjust after comparing with the pages that already rank.

Is a naked URL the same as a branded anchor?

No. A branded anchor uses the brand name, like “Example”. A naked URL uses the address, like example.com. Many people group them together because both are low risk, but tools count them separately.

Should I use https in a naked URL anchor?

The link itself should always point to the final https version. The visible text can be the short domain without https, which usually reads better in a sentence.

Final Thoughts on Naked URL Anchor Text

Naked URL anchor text will not rank a page by itself, and it is not meant to. It is the quiet part of a profile that makes the descriptive links look normal. Count what you have, add naked URLs where the share is low, and always put them in a sentence that explains the page. If you would rather have someone plan the anchors and handle the outreach for you, my link building services include an anchor plan for every target page before the first pitch goes out.